Related Documents:
Approvals:
IEC-60320-C14 RIGHT ANGLE to ROJ
Item# 5276.120
10' 18/3 SVT B N C14R TO ROJ
SPECIFICATIONS
PRODUCT INFO
- Our 5276 series features the Right Angle IEC-60320-C14 Plug with an ROJ.
- These IEC power cords are ideal for hard-wiring into your equipment. The male end plugs into any IEC-60320-C13 outlet or connector, while the opposite end hard-wires directly into your device or appliance.
- This right angle power cord is ideal for use in confined spaces because it eliminates stress placed on the conductors and strain relief. The definition of a right angle IEC plug is that when facing the outlet with the plug installed ground-pin-up, the cord trails away to your right-hand side.
- An ROJ, or Removed Outer Jacket, is the result of stripping the exterior jacket from the power cord and exposing the conductors for the purpose of hard-wiring the cord into your equipment. Our standard ROJ includes the removal of 2 inches (51mm) of jacket and of 1/4 inch (6mm) of conductor insulation.
- The 5276.120 carries the UL and C-UL approvals and is rated at 10A - 250V.
- This North American power cord can also be used in the following countries:
| Bahamas | Jamaica |
| Barbados | Laos |
| Belize | Mexico |
| Canada | Micronesia |
| Cayman Islands | Nicaragua |
| Costa Rica | No. Mariana Island |
| Cuba | Palmyra Atoll |
| Dominican Republic | Panama |
| Ecuador | Peru |
| El Salvador | Philippines |
| Guam | Puerto Rico |
| Guatemala | Thailand |
| Haiti | Venezuela |
| Honduras | Virgin Islands |
