Related Documents:
Approvals:
IEC-60320-C20 to IEC-60320-C19 RIGHT ANGLE
Item# 5336.039
3'3" 14/3 SJT B I C20 TO C19R
SPECIFICATIONS
PRODUCT INFO
- Our 5336 series features the standard IEC-60320-C20 Plug with the Right Angle IEC-60320-C19 Connector.
- These IEC power cords are the standard Jumper Cables (or Network Patch Cables) used for PDUs, servers, and UPSs. The male end connects to any IEC-60320-C19 outlet or connector, while the female end connects to any device or appliance that has an IEC-60320-C20 inlet. This could be considered an extension cord since it extends the range (length) for your equipment or devices from the power source.
- This right angle power cord is ideal for use in confined spaces because it eliminates stress placed on the conductors and strain relief. The definition of a right angle connector is that when facing the equipment with the connector installed ground-pin-up, the cord trails away to your right-hand side.
- This series of power cords is available in varied lengths, allowing you to clear space for airflow, maintain an unobstructed exhaust port, and increase the life and operational capacity of your equipment.
- The 5336.039 carries the UL and C-UL approvals and is rated at 16A - 250V.
- This North American power cord can also be used in the following countries:
| Bahamas | Jamaica |
| Barbados | Laos |
| Belize | Mexico |
| Canada | Micronesia |
| Cayman Islands | Nicaragua |
| Costa Rica | No. Mariana Island |
| Cuba | Palmyra Atoll |
| Dominican Republic | Panama |
| Ecuador | Peru |
| El Salvador | Philippines |
| Guam | Puerto Rico |
| Guatemala | Thailand |
| Haiti | Venezuela |
| Honduras | Virgin Islands |
