Related Documents:
Approvals:
IEC-60320-C14 DOWN ANGLE to IEC-60320-C19
Item# 6281.024
2' 14/3 SJT B N C14DA TO C19
SPECIFICATIONS
PRODUCT INFO
- Our 6281 series features the Down Angle IEC-60320-C14 Plug with the IEC-60320-C19 connector.
- These IEC power cords are ideal for hard-wiring into your equipment. The male end plugs into any IEC-60320-C13 outlet or connector, while the opposite end hard-wires directly into your device or appliance.
- This down angle power cord is ideal for use in confined spaces because it eliminates stress placed on the conductors and strain relief. The definition of a down angle IEC plug is that when facing the outlet with the plug installed ground-pin-up, the cord trails down and away from the wall socket.
- These North American power cords are the standard cords used for networking, laboratory, and communications equipment. They connect on one end to the standard North American wall outlet and on the other end to PDUs, servers, and UPSs or any device featuring a C20 inlet.
- The 6281.024 carries the UL and C-UL approvals and is rated at 15A - 250V.
- This North American power cord can also be used in the following countries:
| Bahamas | Jamaica |
| Barbados | Laos |
| Belize | Mexico |
| Canada | Micronesia |
| Cayman Islands | Nicaragua |
| Costa Rica | No. Mariana Island |
| Cuba | Palmyra Atoll |
| Dominican Republic | Panama |
| Ecuador | Peru |
| El Salvador | Philippines |
| Guam | Puerto Rico |
| Guatemala | Thailand |
| Haiti | Venezuela |
| Honduras | Virgin Islands |
